A linked rectangular frame positions four locking suction cups around the edges of Starlink Mini for more evenly distributed support.
Secure the edges.
Keep the center clear.
The edge-mounted frame holds the device without covering the central antenna surface. Its open structure also allows battery replacement or power-cable access without repeatedly removing the complete bracket.
Use only on a clean, smooth, dry and non-porous surface. Suction performance must be checked before every deployment.
Product information.
Confirmed construction and dimensional information based on the supplied product material.
| Specification | Details |
|---|---|
| Product type | Four-cup vehicle suction mount |
| Product SKU | XL0174 |
| Reference model | TSB01 |
| Intended device | Starlink Mini |
| Frame dimensions | Approximately 265 × 305mm |
| Attachment points | Four locking suction cups |
| Suitable surface | Clean, smooth, dry, non-porous glass or comparable surface |
| Mounting orientation | Interior or exterior positioning, subject to surface and operating conditions |
| Interface access | Open access to the battery and power-connection area |
No verified load, wind-speed, vehicle-speed or long-term environmental rating was supplied. Confirm the intended operating conditions before use or resale.
Designed for simpler mounting.
The frame combines four-point support, reversible positioning and accessible connections in one compact vehicle-mounting format.
Four-corner support
A linked rectangular structure distributes the mounting points around four corners rather than concentrating support at two points.
Locking suction cups
Four lever-operated suction cups create removable attachment points on suitable smooth glass surfaces.
Reversible positioning
The mounting arrangement supports inside- or outside-glass positioning when the selected surface and operating conditions are suitable.
Unobstructed access
The open frame is designed to preserve access to compatible battery and power connections without removing the complete mount.
Installation workflow.
Follow the supplied assembly instructions and verify every connection before operating the mounted equipment.
Assemble the frame
Fit the linkage bars and mounting points around the compatible Starlink Mini body according to the product instructions.
Clean the surface
Remove dust, grease and moisture from the selected glass area and allow the surface to dry completely.
Position and lock
Place all four cups flat against the surface, remove trapped air and operate each locking lever fully.
Inspect and secure
Pull-test every cup, confirm frame alignment and use an appropriate secondary safety tether where required.
Confirm the mounting conditions.
- Use only on clean, smooth and non-porous surfaces
- Keep clear of the driver’s view, airbags and moving sunroof parts
- Inspect suction cups before every use
- Confirm local rules and intended vehicle operating conditions
Order and delivery.
Availability, package contents, MOQ, lead time, labeling and quotations should be confirmed for each order.
- Product consultation
- Technical information
- Sample and bulk inquiries
- Shipping coordination
Is this mount suitable for your project?
Send us the intended mounting location, vehicle or glass type, estimated quantity and destination country. We will help confirm the current configuration and quotation details.
